一、Introduction

   JLD-278AB static electricity flocking glue is two-component adhesive.Mix thoroughly according to the proportion,easy and convenient to operate.Mainly for metals , cashmere fiber and nylon velvet.High cost-effective and stable.
二、(Performance Date Sheet)

三、Technical Features
Long operating time, 4 hours operating time at room temperature.
Heating curing,free to regulate temperature and curing speed according to the production process ,at temperature a00~120 in one hour.
四、Instructions
1、Configuration the glue according to the weight(1:2),stir.The thickness of adhesive is 0.05mm,and then piece and clampin,assure uniform pressure at the same time.
2、To gain the highest mechanical strength, we can sanding or sandblasting the surface ,scrub the surface with a special solvent dust and grease.
3、Don’t interlace AB solvent,don’t rewind the glue to the original container to protect the original glue.
五、(Package)
Tow part:20KG/barrel (
we can provide packaging according to customer requirements
六、Storage
Avoid direct sunlight,storage temperature is 15-25℃,can not change the original packaging,don’t rewind the glue to the original container to protect the original glue.
七、Precautions
1、If the users need special packaging specifications, further deliberations are needed.
2、The company has the rights of retaining the best process and changing product specifications in new product development period.
3、Due to unpredictable factors during the actual use , we recommend you try carefully before using the trial ,bulk order after passing quantities.